Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Taromid A 280 H MG6 DX0 - PA66-MX30 - Taro Plast S.p.A.

Material Data Center offers the following functions for Taromid A 280 H MG6 DX0:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Taromid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
拉伸模量 8000 MPa ISO 527
断裂应力 80 MPa ISO 527
断裂伸长率 2.6 % ISO 527
弯曲模量, 23°C 8200 MPa ISO 178
ASTM数据
悬臂梁缺口冲击强度, 1/8 in 50 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 232 °C ISO 75-1/-2
维卡软化温度, A 254 °C ISO 306
维卡软化温度, B 242 °C ISO 306
线性热膨胀系数, 平行 28 E-6/K ISO 11359-1/-2
厚度为h时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 0.8 mm -
ASTM数据
UL94 燃烧性 V-0 - UL 94
测试厚度 3.2 mm -
氧指数 30 % ASTM D 2863
电性能价值单位Test Standard
ISO数据
体积电阻率 >1E13 Ohm*m IEC 62631-3-1
相对漏电起痕指数 400 - IEC 60112
其它性能价值单位Test Standard
吸水性 4.5 % 类似ISO 62
密度 1590 kg/m³ ISO 1183
典型数据
特殊性能
阻燃的, 经热稳处理的/耐热的
特征
少气味
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.